Instantaneous water heater system WM 400 V
5.4 Waste water filtration plant
The waste water filter system is used for filtration of contaminated shower water.
In the three-stage filtration system consisting of a pre-filter (220), a pressure gauge for
filter monitoring and two fine filters (50, 1), the water is filtered and discharged through
the drain line
To achieve a constant flow pump
.
too strong fouling.
We recommend a filter change of the two fine filter at about 3.0 bar
The pre-filter is to clean up pollution
Filter gauge filter monitoring
Screw cap
Fine filter 1
Fine filter 50
Filter change:
Unscrew the cap nut
Remove and dispose of the filter
Insert the new filter cartridges
Tighten the cap nut
Damaged filter cartridges can not be reused
All the filters mentioned must be disposed of in accordance with statutory regulations.
Guide book
the fine filters have to be changed at a
,
Pre-filter 220
Page 9 from 17