RUSTA 90101064 Manual page 11

OPERATION INSTRUCTIONS
1. CLOCK SETTING
1. Press "Clock/Pre-Set", the minute figures will flash.
2. Turn the knob to adjust the hour figures, the input time should be within 0--23.
3. Press "Clock/Pre-Set", the minute figures will flash.
4. Turn the knob to adjust the minute figures, the input time should be within 0--59.
5. Press "Clock/Pre-Set" to finish clock setting. ":" will flash, and the time will light.
NOTE!
• If the clock is not set, it would not function when powered.
• During the process of clock setting, if you press "Clock/Pre-Set", the oven will
go back to the previous status automatically.
2. MICROWAVE COOKING
Press "Microwave" the LED will display "P100". Press "Microwave" for times or turn the
knob to choose the power you want, and "P100", "P80" "P50", "P30" or "P10" will display
for each added press. Then press "Start/+30Sec./Confirm" to confirm, and turn "the
knob" to set cooking time from 0:05 to 95:00. Press "Start/+30Sec./Confirm" again to
start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
OPERATE THE OVEN AS THE FOLLOWING STEPS.
1. Press "Microwave" once, the screen display "P100".
2. Press "Microwave" once again or turn the knob to choose 80% microwave power.
3. Press "Start/+30Sec./Confirm" to confirm, and the screen displays "P 80".
4. Turn the knob to adjust the cooking time until the oven displays "20:00".
5. Press "Start/+30Sec./Confirm" to start cooking.
NOTE! the step quantities for the adjustment time of the coding switch are as follow:
"MICROWAVE" PAD INSTRUCTIONS
Order Display
1 P100
2 P80
3 P50
4 P30
5
P10
Microwave Power
100%
80%
50%
30%
10%
The knob
0–1 min : 5 seconds
1–5 min : 10 seconds
5–10 min : 30 seconds
10–30 min
: 1 minute
30–95 min : 5 minutes
11