First-Time Installation; Select Language; Set-Up With A Center (Sold Separately) - Philips WAS6050/05 User Manual

5 First-time
installation
When you connect the Music Station to the
power supply, the automatic installation process
starts. You must select the language (see 'Select
language' on page 13) before you can continue.

Select language

1
When you connect the Music Station to
the power supply for the first time, wait for
the language selection menu to select your
language.
2
Press to select, then press .
After you set the language, the Music
È
Station starts the search for a Center
(sold separately).
Tip
•
After the first-time language set-up, you can change the
language in the Settings menu (see 'Change language'
on page 999).
Set-up with a Center (sold
separately)
You can stream your audio to the Music Station
from a Philips Center of the WAC series, such
as WAC3500D, WAC7000, or WAC7500.
You can connect the Music Station to the
Center in two different modes:
• Infrastructure
• Ad-hoc (if you do not have an Internet
connection / PC)
1
Place the Music Station and the Center
side by side on a flat and level surface that
is strong enough to support the two units.
2
Complete the set-up process: Consult the
user manual of the Center how to add a
Station to the Center.
3
Position the Music Station in a suitable
location (within reach of a power socket).
4
Position the Music Station where it is
separated from the Center by no more
than one wall.
Note
•
Connections that include a router require that the
router is switched on at all times.
EN
13