Download Print this page

Hyundai J9F57 AC200 Manual page 9

Kona, remote engine start - push start

Advertisement

Function Check
Items to be Checked
1. Press
button one time.
(All doors, hood & trunk are closed).
1. Press
button 2 times.
2. Press
button 2 more times.
1. Press
button one time.
2. Within 3 seconds, press and hold
While the vehicle is running via remote start,
1. Press
button two (2) times.
2. Press
button two (2) additional times.
While the vehicle is running via remote start,
1. Press
button one (1) time.
While the vehicle is running via remote start,
1. Press and hold
button for two (2) seconds.
While the vehicle is running via remote start,
1. Open the hood.
While the vehicle is running via remote start,
1. Open any door.
While the vehicle is running via remote start,
1. Open trunk.
While the vehicle is running via remote start,
1. Open driver's door and press brake pedal with OE Smart KEY
within 30 sec.
While the vehicle is running via remote start,
1. Open driver's door and enter into vehicle with OE Smart KEY, close
the driver's door within 30sec.
On the vehicle SMART KEY
1. Press
button, one (1) time.
2. Within three (3) seconds, press
While the vehicle is running via remote start with the SMART KEY,
1. Press
button one (1) time.
2. Press
button one (1) additional time.
3. Press
or
button one (1) time.
Troubleshooting
Symptom
The vehicle does not LOCK by using the Remote Start Key Fob.
The vehicle LOCKS, UNLOCKS, but does not START.
The remote does NOT LOCK / UNLOCK.
and does not START the vehicle. The Remote LED lights flash when buttons
are pressed.
The LED icon lights on the Transmitter Fob does not light up.
The hazard lights will flash while the engine is started remotely.
Engine turns off immediately when the brake pedal is pressed
after starting engine with remote.
Genuine Accessories
Transmitter Fob LOCK icon will flash, vehicle signal lights will flash, and all
doors will LOCK.
Transmitter Fob UNLOCK icon will flash, vehicle signal lights will flash, and
Driver's door will UNLOCK.
Transmitter Fob UNLOCK icon will flash, vehicle signal lights will flash, and all
doors will UNLOCK.
Transmitter Fob LOCK icon will flash, vehicle signal lights will flash, and all
doors will LOCK.
button for 2 seconds.
Transmitter Fob KEY icon will flash, the engine will crank and start, the
vehicle signal lights will flash.
The hazard lights will flash while the engine is started remotely.
Transmitter Fob UNLOCK icon flash, vehicle signal light flashes twice
and Driver's door will unlock.
Transmitter Fob UNLOCK icon flash, vehicle signal light flashes twice
and All doors will unlock.
Transmitter Fob LOCK icon will flash, vehicle signal lights will flash, and all
doors will lock.
Transmitter Fob KEY icon will flash, and the engine will stop.
The engine will stop.
The engine will stop after approximately thirty (30) seconds.
The engine will stop after approximately fifty (50) seconds.
The engine will continue running for drive off automatically.
(Hazard lights will stop flashing after drive off).
The engine will continue running for drive off automatically.
(Hazard lights will stop flashing after drive off).
Vehicle signal lights will flash, and all doors will LOCK.
Engine will crank and start (there may be a short delay), the vehicle signal
lights will flash.
or
, one (1) time.
Vehicle signal lights will flash, and Driver's door will UNLOCK.
Vehicle signal lights will flash, and all doors will UNLOCK.
The engine will stop.
Check the vehicle status
1. Engine is OFF.
2. Accessory function is OFF.
3. All doors are closed.
4. Hood and Tailgate are closed.
Ensure the Valet Mode is OFF.
(Refer to Owner's Guide for details.)
Ensure that the buttons are properly activated.
Buttons may not recognize a command if the LED icon light is
still flashing.
The Transmitter Fob is not paired to the Control Module.
Follow the Remote Start Fob Pairing Procedure in the
Installation Instructions.
The Transmitter Fob batteries are dead.
Refer to the Owner's Manual for instructions to change the batteries.
This is normal and cannot be changed.
Ensure Smart KEY FOB is inside the vehicle.
Revision Date
01/02/2019
Result
Items to be Checked
Page 9 of 10

Advertisement

loading