Advertisement
A
Remote Start Transmitter Fob Pairing Procedure
(not necessary for new installations - only needed if fob is replaced)
Smart Key 3X
Remote Start Fob 1X
A. Open the Driver's Door and Tailgate.
B. Press LOCK button of Smart Key three (3) times within five (5) seconds.
C. Within five (5) seconds, press START button on the Remote Start
N
Transmitter Fob one (1) time.
O
D. If another Fob is to be paired, press the next Fob's START button within
T
five (5) seconds.
E
E. Verify that the new Fobs are functioning properly by performing a
LOCK/UNLOCK operation.
NOTE: The Remote Engine Start system can recognize up to three (3)
Transmitter Fobs. The kit contains two (2) Transmitter Fobs. If a new Fob is
needed later, the Fob pairing process should be done with the original Fob,
or oldest available Fob.
Genuine Accessories
Revision Date
01/02/2019
Page 8 of 10
Advertisement
