Siemens SINAMICS V20 Manual page 26

4 Configuration and Project Engineering
4.3 Configuring the SIMATIC HMI KTP600 operator panel
No.
3. Configure a new HMI connection in the Network view. To do this, use drag and drop to connect the
Ethernet interfaces of PLC_1 and HMI_1. As a consequence, HMI_Connection_1
4. Compile the HMI_1 device in order to detect possible errors and save its configuration.
2
8
Name can be changed.
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894, V1.0,
1
09/2018
Action
8
will be created.
26