Siemens SINAMICS V20 Manual page 25

4 Configuration and Project Engineering
4.3 Configuring the SIMATIC HMI KTP600 operator panel
No.
Alternatively, you can also copy the fully configured operator panel from the supplied sample
project to your new project. For the copy operation, you can open both TIA projects at the same
time and use drag and drop to move the HMI device via from the graphic area of the Network view
of the source project to the one of the target project.
Sample project
2. Continue with step 3, provided that you have newly added the HMI device from the catalog. If you
have added the HMI device by copying it, you have to delete the old connection.
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894, V1.0, 09/2018
Action
Your user project
25