Siemens SINAMICS V20 Manual page 23

4 Configuration and Project Engineering
4.2 Configuring the SIMATIC controller
No.
Create your user program or – if you want to use the supplied sample program – copy the following
4.
objects from the sample program to your new project:
5. Compile the PLC_1 device in order to detect possible errors.
You can ignore the warning displayed when compiling the device.
6. Save the project.
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894, V1.0, 09/2018
Action
For the copy operation, you can open both TIA
projects at the same time. In the dialog regarding
conflicts when copying, select Replace existing
objects and move to this location.
23