Advertisement
4A. Re-insert the screw through the holes in the chair
frame and caster stem.
Note: Screw head should be to the outside of the frame
and the nut to the inside. Hand start the nut onto the end
of the screw.
4B. Use a wrench and hex key to tighten the casters into
place. Repeat for second caster.
Bolted Axles
5. Remove the nut, washer and spring lock washer from
the bolt. Place bolt thru the wheel.
6. Place washer on to bolt.
4A.
5.
6.
4B.
4
Advertisement
