Honeywell X-Superteam XPS-100 System Operation Manual page 24

c\
c\
o
SAVE PROM DISK TO DISKETTE
DeseriptlCll:'
~his
operation is used to copy one or' more partitions from a disk
to a set of diskette.
Use the option
-s
when running the procedure (save
-s)
to know
the munber of diskettes needed to save one partition or the whole
disk. In this way, for each partition the number' of diskette required
for the save is given.
, It is advisable to execute this operation at the end of the'
installation phase, before starting any activity.
This operation may be repeated periodically, whenever the contents
of the operating disk is changed, or at the end of the day. The save
copy may also be executed weekly or monthly. For any decision ask
the System Administrator.
It is recommended to execute the save operations using two sets
of diskettes, in order to have a recent version of any updated data.
NOTE: In this paragraph, x Indicates the number corresponding to the
disk to be saved; N indicates the number of the diskettes
requested to save specific partition
1. Initialize the system from disk (see "Initialization")
2.
Enter the following command:
I
saye
-&
press RETURN
When the following messages are
displayed:
Save V 0.0, Honeywell Information System Italla 1986
wblch disk do
you want
to save (H)t><
20
enter the number '(x)
corresponding to the disk to
be
saved and press
RETURN