Kenmore PG-40406S0L Use & Care Manual page 19

Right Frame
□ Install (4)M4×10 Screws as shown to the leg marked "5C". Do not fully tighten the screws at this
time. Leave 1/8-inch gap below screw head for rail attachment. (A)
□ Attach one end of a Side Upper Rail "6A" to the leg, tighten the screws and install and tighten another
(1)M4×10 Screw.(C)
□ Attach one end of a Side Lower Rail "6B" to the leg and tighten the screws. (C)
Install (4)M4×10 Screws as shown to the leg marked "5D". Do not fully tighten the screws at this
□
time. Leave 1/8-inch gap below screw head for rail attachment. (B)
□ Attach the other end of Side Upper Rail and Side Lower Rail to the "5D" Leg and tighten the screws.
Install and tighten another (1)M4X10 Screw to the Side Upper Rail. (D)
M4x10 screws Qty: 10 pcs
A
C
B
D
19