Honeywell QUIETPRO QP100 Series Quick Reference Manual

USING QUIETPRO
Consult the guide "Getting Started" or the "User Manual" for
instructions regarding fitting the eartips and how to connect radios.
Turn ON - press [CONFIRM] for 2 seconds
Turn OFF - press [CONFIRM] for 3 seconds
FIT TEST
At start up, QUIETPRO performs a fit test of the eartips. To learn how
to fit the headset correctly, please study the "Getting Started" guide.
PASS - The system will enter normal-use mode and you will hear
the surroundings.
FAIL - A warning will be presented followed by a wobble tone.
Refer to the "Troubleshooting Guide" in the back of the
"User Manual" forinstructions on how to improve the fit to pass the test.
Passing the fit test will ensure proper hearing protection, clear
communication and optimal use of QUIETPRO.
To start a fit test without calibration - double click
[CONFIRM]
Hear-through volume
Adjust the volume with the [+] and [-] buttons.
Default volume - press and hold [+] and [-] for 3 seconds
Radio volume
Press the [MENU] button once, then adjust the
radio volume with the [+] and [-] buttons.
Sound Exposure Monitoring
This unit can provide an indication of your personal
exposure to sound / noise. Feedback is provided
through the LED lights and voice feedback in the
headset. If you receive the voice alert 'Dose level
too high' move to quiet environment to minimize the
risk of over exposure.
Battery status
At the same time, press and hold
[MENU] and [CONFIRM] for
3 seconds
www.honeywellsafety.com/quietpro
®
CONFIRM
2 x
CONFIRM
Low
Medium
High
Too High
Full
&
Medium
Low
CONFIRM
Very Low
QUIETPRO QP100 Series QUICK REFERENCE GUIDE
®
WARNING! Carefully read and make sure you understand the
User Manual before using QUIETPRO for the first time.
For more information visit: www.honeywellsafety.com/quietpro
USER INTERFACE
Indicator
lights
[MENU]
[CONFIRM]
Connector interface
The picture shows a QP100Ex control unit. If you have
purchased another QP100 product it will have a different look.
Charging
the battery
[PTT]
VOLUME [+]
VOLUME [-]
HEADSET COM
Document No. DWG10227_EN_v. 1.1