HIKVISION 62 Series Quick Start Manual page 23

Network Camera·Quick Start Guide
4. Place the camera to the bracket; adjust the camera to the proper
position, and fix the camera with screws.
Figure 2-10 Install the Camera to the Bracket
5. Loosen the tilt adjust screw to adjust the tilt angle [0 °~360°].
6. Loosen the pan adjust screw to adjust the pan angle [0°~±45°].
7. Tighten the tilt adjust screw and pan adjust screw.
Tilt Adjust Screw
Pan Adjust Screw
Figure 2-11 Installation Completed
23