Seca 360° Wireless Network; Introduction; Seca Wireless Groups - Seca 954 Instruction Manual And Guarantee

7. SECA 360° WIRELESS NETWORK

7.1 Introduction

seca wireless groups

0
1
1. Select the item "Reset" in the menu.
2. Confirm the selection.
You will leave the menu automatically.
3. Switch the scales off.
The factory settings are restored and will be avail-
able when the scales are next switched on.
This device is equipped with a wireless module. The
wireless module allows measured results to be trans-
mitted wirelessly for analysis and documentation. Data
can be transmitted to the following equipment devices:
• seca wireless printer
• PC with USB wireless module
The
seca 360° wireless
groups. A wireless group is a virtual group of transmit-
ters and receivers. If you wish to operate several trans-
mitters and receivers of the same type, up to 3 wireless
groups (0, 1, 2) can be set up with this device.
The set-up of several wireless groups ensures the reli-
able transmission of measured values with the correct
address when using more than one examination room
each with similar equipment.
The maximum distance between transmitters and
receivers is approx. 10 metres. This range may be
reduced under certain local conditions, e.g. thickness
and type of wall partitions.
The following combination of devices is possible per
wireless group:
• 1 set of baby scales
• 1 set of personal scales
• 1 length measuring device
• 1 seca wireless printer
• 1 PC with seca USB wireless module
network operates with wireless
seca 360° wireless Network • 73
English