Summit Treestands Climbing System Instructions

Instructions Summit Climbing System

Your Climbing System should include one (1) camo pouch (1) 7/16" thirty (30) foot rope
with a loop tied in one end and a knot tied in the other end. One (1) 8mm prussic hitch
looped around the 7/16" thirty foot rope. Figure 1 shows the items included.
Items included in the Climbing System value pack: Three (3) 7/16" thirty (30) foot rope
with a loop tied in one end and a knot tied in the other. Three (3) 8mm prussic hitch
looped around the 7/16" thirty foot rope. Figure 2 shows the items included.
Figure 1.
1. Bring the loop end of the 30 foot rope around the tree. Thread the rest of the 30
foot rope including the prussic hitch through the loop Figure 3. This will secure
the 30 foot rope to the tree above your head while standing on your treestand.
Figure 3.
You will need to attach the knot end of the climbing system to the base of the tree
about 5 feet off the ground Figure 4.
Figure 4.
2. Attach your harness tether to the prussic hitch of the climbing system with a
locking safety clip Figure 5.
Figure 2.