How To Mount The Pam Module; Precautions To Mount The Fm Tuner Module - Inter-m PAM-324 Operation Manual

PublIc Address AMPlIfIer

How to Mount the PAM Module

How to Mount the PAM Module
(1) Turn off the device before connecting the PAM module.
(2) remove the screws from the module slot in front and open it.
(3) Insert the module to mount completely into the slot.
(4) fix the 4 edges of the module with screws.
(5) Turn on the device.
(6) check whether the status data of the module is displayed in the installed PAM module indicator.
(7) If power is not supplied to the installed PAM module, turn off the device, remove the module from the slot,
mount it again, and fix it carefully with screws.
(8) Turn on the device again and check whether the module is turned on.
(9) Adjust the output volume by using the volume control in the module.
(10) Adjust the Main Volume control in the device to check the output sound from the module through the
speaker(s).

Precautions to Mount the FM Tuner Module

Precautions to Mount the FM Tuner Module
(1) If you install an fM Tuner module, mount it in the left module slot.
(2) Install the fM antenna as far away from the speaker cable or power cable as possible.
(3) If fM reception is poor or there are too many noise problems, connect a 75 Ω coaxial cable with the module
antenna and array the cable near the outdoor area before connecting the antenna to the end of the cable.
12 PAM-312/324/336/348