Table Of Contents; Introduction - Husqvarna DS900 Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 6
Installation.......................................................................8
Operation........................................................................ 9
Product description
The product is a drill stand for Husqvarna drill motors.
• The product can be used with drill bits with a
maximum diameter of 900 mm.
• The drill column can be tilted 0-60°.
• The product has a quick mounting plate for the drill
motor.
• It is possible to use a 2 m long drill column
(accessory).
2
Contents
Maintenance................................................................. 10
Transportation and storage...........................................12
Technical data.............................................................. 13
Service..........................................................................13
EC Declaration of Conformity....................................... 14

Introduction

Intended use
This product is used together with a Husqvarna drill
motor to drill in ceilings, walls and floors. The product is
used on concrete, brick and different stone materials. All
other use is incorrect.
The product is used in industrial operations by operators
with experience.
1324 - 001 - 11.10.2019