Advertisement
Radio bus system
Radio wall transmitter, flat design
Changing the battery
WARNING!
Risk of chemical burns.
Batteries can burst and leak.
Replace batteries only with an identical or equivalent type.
o
Unscrew wall transmitter from the base plate or the wall and remove it (see section
Connecting and mounting the device).
o
Remove empty battery carefully using a screwdriver.
i Keep contacts of batteries and device free of grease.
o
Apply new battery to the positive contact of the battery holder. Observe polarity: the
positive pole of the battery must be at the top.
o
Press gently on battery to snap it in.
o
Mount wall transmitter on base plate.
32532712
10499114 I00
Figure 7: Remove battery
Figure 8: Insert battery
28.09.2011
6/9
Advertisement
