Subscribe to Our Youtube Channel
Related Manuals for artisan ARTPC-SB2M
Summary of Contents for artisan ARTPC-SB2M
- Page 1 Artisan ARTPC-SB2M ASSEMBLY INSTRUCTIONS ARTP-SB2 DUAL SIDE BURNER MOUNTING BRACKET FOR ARTISAN CART MODELS: ARTPC-26, 32 AND 36...
- Page 2 ITEMS NOT INCLUDED BUT REQUIRED FOR ASSEMBLY OF THIS UNIT: SCREWDRIVER # 3 - PHILIPS MEDIUM SIZE ADJUSTABLE WRENCH SMALL / MEDIUM PIPE WRENCH PIPING COMPONENT SUPPLIED WITH KIT: 3/8” Ø x 54” LONG 3/8” x 1/2” NPT TEE 1/2” NPT NIPPLE 1/2”...
-
Page 3: Assembly Procedure
Artisan cart models. Figure # 1 NOTE 2: The ARTPC-SB2M Bracket can be mounted to the left or right side of the cart. For illustration purposes, the assembly will be shown on the right side of the cart STEP 2:... - Page 4 Insert the ARTP-SB2 Perimeter Flange between the Main Bracket and the OFFSET Flange.. The ARTP-SB2 should rest tightly against the body of the Main Bracket near the top of the Artisan cart, but loose at the bottom. Figure # 4...
-
Page 5: Step 6: Piping Connection
STEP 5: Fasten the ARTP-SB2 Side Burner to the ARTPC-SB2M Mounting Bracket with the (2) 1/4-20 TRUSS head screws provided in this kit. (item 4 - part 200-0057 on Page (See figure # 5) The FRONT fastening point is located in-... - Page 6 STEP 7: NOTE: CART AND ELECTRICAL Figure # 7 POWER CORD NOT SHOWN TO SIMPLIFY VIEW Now that the 3/8” flex stainless steel gas line has been rout- ed inside the body of the ARTP BBQ cart, it needs to be con- nected to the BBQ main feed gas line.
- Page 7 STEP 9: Once the ARTP BBQ and the ARTP-SB2 Dual Side Burner gas been tested for leaks and all burner light up to your satisfaction, it is time to close up the Side Burner Unit’s outside skin panels. (see figure #8) Install the Back Cover (Item 2 - part # 100-3091 on page 2) by sliding the top section between the ARTP-SB2 pe- rimeter and the inside support flange.
- Page 8 The installation of the ARTP-SB2 Dual Side Burner with the ARTPC-SB2M mounting bracket allows the side burner unit to be mounted to the left or right side of the ARTP BBQ cart. When the installation is finished the unit should look similar to the unit shown below.
Need help?
Do you have a question about the ARTPC-SB2M and is the answer not in the manual?
Questions and answers