Table of Contents
Advertisement
7. Secure the bottom end of the handle by inserting two screws and
tightening them with a Phillips screwdriver.
NOTE: Do not overtighten.
Rehang the Refrigerator Door
1. Lower the refrigerator door onto the bottom hinge pin.
2. Screw the 4 screws into the center hinge location on the left side
with a 1/5" socket and ratchet.
3. Straighten the door and place the center hinge pin into the open-
ing on top of the door. Remember to include the washer.
4. Move the door into place, so you can align the center hinge
bracket over the center hinge holes on the left side. Insert and
tighten the two screws with a 1/5" socket and ratchet.
NOTE: Make sure the washer is in place on top of the hinge pin.
11
Advertisement
Table of Contents
