Safety Instructions - MB Connect Line mbSPIDER Series Quick Start Up Manual

Safety instructions

● The mbSPIDER datamodem is built to the latest technological standards and
recognized safety standards (see Declaration of Conformity).
● Install the data modem in a dry location. Do not allow liquid to get inside the
device, as this could result in electric shocks or short circuits.
● The data modem is for indoor use only.
● The manufacture shall not accept any guarantee for modifications made by the
user. Improper handling and non-observance of the description shall render all
warranty claims null and void.
● Mounting/electrical installation may only be performed by a qualified electrical
specialist.
● All work on the device (e.g. on interfaces, SIM card replacement, replacing the
antenna, etc.) may only take place when the system is de-energized.
NOTE: Electrostatic Discharge!
Observe the necessary safety precautions when handling components
that are vulnerable to electrostatic discharge (EN 61340-5-1 and IEC
61340-5-1)!
The mbSPIDER datamodem are maintenance-free units.
If a mbSPIDER have damage or malfunction, the device must be
immediately taken out of service and secured against inadvertent operation.
3