Loading The Factory Settings - MB Connect Line mbSPIDER Series Quick Start Up Manual

Loading the factory settings

When the mbSPIDER is reset to the factory settings, all the data (log files, visua-
lization configuration and system configuration) is lost.
Ensure that no USB stick is connected to the device.
1.
Turn on the device or, if the device is on, press the Reset button..
2.
Then immediately press the Function button and
keep it pressed.
3.
After 20 - 30 seconds the LED Ready starts to flash.
4.
Approximately 10 sec later, the LEDs Fc1, Fc2, and
Fc3 will flash.
5.
Now release the Function button.
6.
20 - 30 seconds later, the LEDs Power + Ready
light up.
The mbSPIDER is now ready for operation and can / must be reconfigured.
ADVICE
13