Setting The Clock Manually; To Set The Colour System - Philips DVP721VR/02 Owner's Manual

Setting the clock Manually

The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when you DVD+VCR detects a
channel that broadcasts a Teletext signal. If the broadcast
signal is weak the clock will not be set and will require
setting manually.
1 Press SYSTEM MENU.
Press b or B to select TIME DATE.
Press OK.
The auto adjust mode can be set to 'OFF' by pressing 3
or 4 if you want to set the time manually.
Press OK.
AUTO ADJUST
: ON
- -
1 2
TIME
OK i
DATE
2
Use the numbered buttons on the remote control to
alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
HH MN DD
8 : 00 1
1 2
TIME
DATE
3
If you make a mistake press b b or B B and enter the
correct details.
4
Press SYSTEM MENU.
HH MN DD MM YY
- - : - - - - . - - . - - - - -
1 2
TIME
i
DATE
MM YY
. 01 . 04 THU
i
Before Operation - VCR part

To set the colour system

1
Press SYSTEM MENU.
2
The main menu will appear on the TV screen.
3
Press 1 or 2 to select the SYSTEM and press OK.
4
Press 3 or 4 to select according to the COLOUR
system used.
1 2
AUTO
Pr-12
P SET TIME SYS-
REC
PAL
ACMS
R DATE
SECAM
f + -
OSD OSD
ON MESECAM 16:9 DECO-
AUDIO OPR
OFF 4:3 DER
5 Press SYSTEM MENU to remove the menus from the
TV screen.
VCR
Dr.
TEM
SYS-
NIC TEM
i
13