Before Operation - Vcr Part; Using Your Dvd+Vcr For The Very First Time; Setting The Clock Manually - Philips DVP721VR/14 Owner's Manual

Before Operation - VCR part

Using your DVD+VCR for the very first time

For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR
incorporates the Automatic Channel Memory
System (ACMS).This system will automatically tune and
store TV channels in your DVD+VCR.
IMPORTANT!
If you have used a RF Antenna input connection,
refer to 'TV with RF Input only' on page 13.
1 Make sure that you have correctly installed your
DVD+VCR.
Press 1 1 to turn on your DVD+VCR.
If the initial Menu Screen doesn't appear on screen, make
sure that you have tuned your TV to a video channel. Or if
this is correct it may mean that your DVD+VCR is already
tuned.
2
Press b or B to select the desired country.
(A: Austria, B: Belgium,CH: Switzerland, D: Germany, DK:
Denmark, E: Spain, F: France, I: Italy, N: Norway, NL:
Netherlands, P: Portugal, S:Sweden, SF: Finland, OTHERS)
A B CH D DK
N NL P S SF
Pr-12
ACMS
3
Press OK to start the automatic tuning process.
01 C02
02 C03
03 C04
S
Pr-12
ACMS
4 Press SYSTEM MENU to remove the menus from
the TV screen.
12
E F I
OTHERS
OK i
00 PR-01
00 PR-02
00 PR-03
E
i

Setting the clock Manually

The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
1 Press SYSTEM MENU.
Press b or B to select TIME DATE.
Press OK.
HH MN DD
- - : - - - -
1 2
TIME
DATE
2
Use the numbered buttons on the remote control to
alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
HH MN DD
8 : 00 1
1 2
TIME
DATE
3 If you make a mistake press b b or B B and enter the
correct details.
4
Press SYSTEM MENU.
MM YY
. - - . - - - - -
i
MM YY
. 01 . 04 THU
i