To Set The Colour System; Tv With Rf Antenna Input Only - Philips DVP721VR/14 Owner's Manual

To set the colour system

1
Press SYSTEM MENU.
2
The main menu will appear on the TV screen.
3
Press 1 or 2 to select the SYSTEM and press OK.
4
Press 3 or 4 to select according to the COLOUR
system used.
1 2
AUTO
Pr-12
P SET TIME SYS-
REC
R ACMS
PAL DATE
f + -
OSD OSD MESECAM
ON 16:9 DECO-
AUDIO OFF 4:3 DER OPR
5 Press 1 or 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
1 2
RF I/I
Pr-12
P SET TIME SYS-
REC
ACMS
R RF B/G DATE
f RF D/K + -
OSD OSD
DECO-
ON 16:9
AUDIO DER OPR
OFF 4:3
6
Press SYSTEM MENU to remove the menus from the
TV screen.
VCR
Dr.
TEM
SYS-
NIC TEM
i
VCR
Dr.
TEM
SYS-
NIC TEM
i
Before Operation - VCR part

TV with RF Antenna Input only

Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from the
DVD+VCR through the RF cable.
If you have used a
SCART
tune your TV, simply select the AV channel.
The AV channel is already pre-tuned for optimum video
playback on your TV.
Perform the following steps only if interference appears in
the TV picture after you have moved to a different area or
a new station has started broadcasting in your area, or if
you change the connection from RF connection to AV
connection, or vise versa.
1
Turn on DVD+VCR and TV.
2 Tune your TV until you see the picture below
(refer to your TV owners manual).
A B CH D DK
N NL P S SF
Pr-12
ACMS
If the picture is snowy, move to step 4.
If the picture is clear, move to step 3 and press 1 1 on
the DVD+VCR to finish.
3 Press OK to start the automatic tuning process.
4 Press 1 1 on the remote control to enter the standby
mode (the clock indicator will be dimmed).
5
Press and hold CHANNEL 3 or 4 on the DVD+
VCR for more than 4 secs.
RF 36 will appear in the DVD+VCR display.
The following picture will be displayed on the TV screen.
RF CHANNEL
P
SET
R
6
If the picture is still snowy, press CHANNEL 3 or
4 on the DVD+VCR to set the video channel to a
vacant position between 22 and 68 which is not
occupied by any local station in your area.
Note
The RF channel will not change until step 7 has been
executed.
7
Press 1 1 to store the new RF video channel into the
DVD+VCR memory.
Now tune your TV set to the new DVD+VCR RF
channel.
Note
If the TV picture was clear in step 5, do not retune your
TV.
lead you will not have to
E F I
OTHERS
OK i
36
i
13