Data Scope Parameter Setup Display; Data Scope Data Monitor Display - HP AD278A Support Manual

Figure 2-9 Data Scope Parameter Setup Display
After the data capture parameters are setup, go to Start Scope or Review Data and press Enter.
The data monitor screen is displayed.
Figure 2-10 shows the Data Scope Monitor display.
Figure 2-10 Data Scope Data Monitor Display
The Data Scope Monitor screen shows the actual characters as they are being sent and/or received
by the device. This screen displays both hexadecimal and ASCII data.
Press any key and the Data Scope Capture Data screen is displayed.
Figure 2-11 shows Data Scope Capture Data display.
Port Status Menu Selections 21