Table of Contents
Advertisement
DISPlay
Subsystem Syntax
MONitor[:STATe]
Parameters
Comments
Example
44 HP E1346A Multiplexer Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The DISPlay subsystem monitors the channel state of a selected module (or
card) in a switchbox. Only operates with mainframes that have a display,
such as the HP 75000 Series B Mainframe (HP Model Number E1301).
DISPlay
:MONitor
[:STATe] <boolean>
:CARD <number>|AUTO
DISPlay:MONitor[:STATe] <boolean> turns the monitor mode on or off.
Parameter Name
Parameter Type
ON |OFF |1 |0
boolean
•
Monitoring Switchbox Channels: DISPlay[:STATe] ON or
DISPlay[:STATe] 1 turns the monitor mode on to show the channel
state of the selected module. DISPlay[:STATe] OFF or
DISPlay[:STATe] 0 turns the monitor mode off.
•
Selecting the Module to be Monitored: Use the
DISPlay:MONitor:CARD < number>|AUTO command to select the
module.
•
Monitor Mode on an HP 1301 Mainframe Display: The
following shows the monitor mode on the display of an HP E1301
Mainframe
:Switch_112: Chan: 1 93
The example shows that channels 01 and 93 (DT Tree Switch) are
closed.
•
*RST Condition: DISPlay:MONitor[:STATe] OFF |0
Enabling the Monitor Mode
DISP:MON:CARD 2
DISP:MON 1
Range of Values
0 |1 |ON |OFF
Selects module #2 in a switchbox
Turns the monitor mode on
Chapter 5
Advertisement
Table of Contents
