JVC MX-K30R Service Manual page 7

n
Replacing the heat sink cover
1. Remove the six screws "B" from the back panel.
2. Pull the heat sink cover outward.
For CA-MXK30R
n
Removing the top cover and two sides BOARD
1. Remove the six screws "C" that retain the top cover from the
rear of the body.
2. Remove the eight screws "C" and "D" that retain the top from
the two sides of the body.
3. Remove the top cover from the body by lifting it toward the
rear.
For CA-MXK10R/K30R
Fig.4
BB
B
(See Fig.5 and 6)
Fig.5(A)
For CA-MXK15R
For CA-MXK10R/K30R
Fig.5(B)
Fig.6(A)
1-7