Empire Comfort Systems DVLXG55BP90N Installer's Manual page 51

MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
The Thermostat Feature may be disabled if desired.
With all the (3) AAA type batteries installed:
1. Take out one AAA battery.
2. While re-inserting the AAA battery, push and hold down the
thermostat button. This will disable the thermostat feature on the
transmitter.
Room Thermostat (Transmitter Operation)
The remote control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control the
comfort level in a room. To activate this function, press the
thermostat button.
The LCD display on the transmitter will change to show that the
room thermostat is ON and the set temperature is now displayed.
To adjust the set temperature, press the up or down arrow buttons
until the desired set temperature is displayed on the LCD screen
of the transmitter.
Room Temperature
Set Temperature
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature
gets closer to the set point the Smart Function will modulate
the flame down. To activate this function, press the Thermostat
Button until the word SMART appears to the right of the
temperature bulb graphic.
Room Temperature
To adjust the set temperature, press the up or down arrow
buttons until the desired set temperature is displayed on the
LCD screen of the Transmitter.
NOTICE: When Smart Thermostat is activated, manual flame
Set Temperature
height adjustment is disabled.
Room Temperature
Set Temperature
51