Optional : Optional: Connecting To A Multi; Channel Receiver; Receiver Has A Dolby Digital Or Dts Decoder; Optional: Connecting To A Stereo System - Philips DVP3046/94 User Manual

Optional: Connecting to a Multi-

channel Receiver

AV Receiver
Receiver has a Dolby Digital or DTS
decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4
Set the DVD Player's Analog Output to
'Multichannel' to enable playback of DVDs
recorded in Multi-channel. (see page 29
"Setting the analogue output").
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
01-43_DVP3046_94_eng_RC2
MULTICHANNEL AUDIO IN
FRONT REAR CENTER
R R
L L
FRONT REAR SUBW.
1
2
11
Connections
Optional: Connecting to a Stereo
System
STEREO
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
Use the audio cables (white/red) to
connect [FRONT (L/R)] jacks of the DVD
Player to the corresponding AUDIO IN
jacks on the stereo system (cable
supplied).
30/06/06, 5:09 PM
AUDIO
IN
DIGITAL
11