Step 3: Setting Language Preference; Setting The Osd Language; Setting The Audio, Subtitle And Disc Menu Language - Philips DVP3046/94 User Manual

Getting Started
Step 3: Setting language
preference
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.

Setting the OSD Language

The On-screen language for the system
menu will remain as you set it, regardless
of various disc languages.
1
Press SETUP.
2
Press 2 to select {GENERAL SETUP
PAGE}.
3
Press 3 4 to highlight {OSD
LANGUAGE}, then press 2.
4
Press 3 4 to select a language and press
OK.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
18
01-43_DVP3046_94_eng_RC2
Setting the Audio, Subtitle and Disc
menu language
You can choose your own preferred
language or soundtrack from audio,
subtitles and disc menu languages. If the
language selected is not available on the
disc, the disc's default language will be
used instead.
1
Press STOP twice then, press SETUP.
2
Press 2 to select {PREFERENCE PAGE}.
3
Press 3 4 to highlight one of the options
below at a time, then press 2.
– 'Audio' (disc's soundtrack)
– 'Subtitle' (disc's subtitles)
– 'Disc Menu' (disc's menu)
4
Press 3 4 to select a language and press
OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code 'XXXX' (see page 5 "Language
Code") and press OK.
5
Repeat steps
settings.
18
3 4
~ for other language
30/06/06, 5:10 PM