Advertisement
possibly cause interference with other devices or systems. To
avoid such interference, turn off the radio in areas where signs are
posted to do so.
• DO NOT operate the transmitter in areas that are sensitive to elect-
romagnetic radiation such as hospitals, aircraft, and blasting sites.
• Portable Device, this transmitter may operate with the antenna(s)
documented in this filing in Push-to-Talk and body-worn configurat-
ions. RF exposure compliance is limited to the specific belt-clip and
accessory configurations as documented in this filing and the
separation distance between user and the device or its antenna
shall be at least 2.5 cm.
• Mobile Device, during operation, the separation distance between
user and the antenna subjects to actual regulations, this separation
distance will ensure that there is sufficient distance from a properly
installed externally-mounted antenna to satisfy the RF exposure
requirements.
• Occupational/Controlled Radio, this radio is designed for and classi-
fied as "Occupational/Controlled Use Only", meaning it must be used
only during the course of employment by individuals aware of the
hazards, and the ways to minimize such hazards; NOT intended for
use in a General population/uncontrolled environment.
• General population/uncontrolled Radio, this radio is designed for
and classified as "General population/uncontrolled Use".
RF Exposure Compliance and Control Guidelines and Operating
Instructions
To control your exposure and ensure compliance with the
occupational/controlled environment exposure limits, always adhere
to the following procedures.
Guidelines:
• User awareness instructions should accompany the device when
transferred to other users.
• Do not use this device if the operational requirements described
11
Advertisement
