Table of Contents
Advertisement
14
electrolux.com.au
OPERATING INSTRUCTIONS
Stop+go
The
function sets all cooking zones that operate to the
lowest heat setting (
change the heat setting.
does not stop the timer function.
•
To activate this function touch
•
To deactivate this function touch
that you set before comes on.
Lock
When the cooking zones operate, you can lock the control
panel, but not
. It prevents an accidental change of the
heat setting. First set the heat setting. To start this function
touch
. The symbol
Timer stays on. To stop this function touch
setting that you set before comes on. When you stop the
appliance, you also stop this function.
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device:
•
Start the hob with
•
Touch
for 4 seconds. The symbol
•
Stop the hob with
Switching off the child safety device:
•
Start the hob with
Touch
for 4 seconds. The symbol
•
Stop the hob with
Overriding the child safety device for one cooking session:
•
Start the hob with
•
Touch
for 4 seconds. Set the heat setting in less
than 10 seconds. You can operate the hob.
•
When you stop the hob with
operates again.
Hob²Hood
This is an advanced automatic function which connects
the hob to a special hood. Both the hob and the hood
have an infra-red signal communicator. Speed of the fan
is defined automatically on basis of mode setting and
temperature of the hottest cookware on the hob. You can
also operate the fan from the hob manually.
IMPORTANT!
For most of the hoods the remote system is
originally deactivated. Activate it before you use
the function. For more information refer to hood
user manual.
). When
operates, you cannot
.
comes on.
. The heat setting
comes on for 4 seconds. The
. The heat
. Do not set the heat settings.
comes on.
.
. Do not set the heat settings.
comes on.
.
. The symbol
comes on.
, the child safety device
(CONTINUED)
Operating the function automatically
The default automatic mode from the factory is H5. You can
change the automatic mode by following the instructions
below. When you activate the hob the hood will adjust the
fan speed automatically. Please note the below table is a
guide, the fan speed varies depending on the temperature
measured on the cooking zones of the cooktop which can
be affected by the heat setting(s) selected as well as the size
and volume of what you are cooking.
Automatic modes
Automatic
light
Mode H0 Off
Mode H1 On
Mode H2 On
Mode H3 On
Mode H4 On
Mode H5 On
Mode H6 On
1. The hob detects the boiling process and activates fan
speed in accordance with automatic mode.
2. The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3. This mode activates the fan and the light and does not
rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. The display comes on and
goes off
3. Touch
for 3 seconds.
4. Touch
a few times until
5. Touch
of the Timer to select an automatic mode.
IMPORTANT!
To operate the hood directly on the hood panel
deactivate the automatic mode of the function.
When you finish cooking and deactivate the hob,
the hood fan may still operate for a certain period
of time. After that time the system deactivates the
fan automatically and prevents you from accidental
activation of the fan for the next 30 seconds.
Boiling
Frying
Off
Off
Off
Off
Fan speed
Fan speed
1
1
Fan speed
Off
1
Fan speed
Fan speed
1
1
Fan speed
Fan speed
1
2
Fan speed
Fan speed
2
3
comes on.
Hide quick links:
Advertisement
Table of Contents
