Allen-Bradley 140G Series Adjustment Instructions page 4

8
1
DIAGNOSTIC PROCEED PROCEDURA DI CONTROLLO
- UNIT CHECK LED: - CONTROLLO LED:
all the leds in the relay tutti i led del relè si
must come on devono accendere
- LAST TRIP INDICATION: - ULTIMA INDICAZIONE DI TRIP:
if present in the relay's se presente nella memoria
data store del relè
- LED: remains on for - LED:
as long as the 140G-ELTT 140G-ELTT Tester è connessa
Tester is connected to al relè
the relay - PRONTO PER TRIP
- READY TO TRIP
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 140G-IN142A-MU-P - January 2016
DIAGISTIKABLAUF
- EINEITHSPRUF-LED:
Alle LEDs des Relais müssen
aufleuchten
- ANGABE DER LETZTEN AUSLOSUNG:
Wenn im Speicher des Relais
vorhanden.
resta acceso finchè - LED:
bis die Einheit 140G-ELTT Tester
an die Relais angeschlossen ist.
- AUSLOSEBEREIT
LED TRIP TEST DEVICE
Green
Device ON
Dispositivo acceso
2
Einrichtung eingeschaltet
Dispositif allumé
Dispositivo encendido
3
TRIP
140G-ELTT
(ordered separately)
PROCÉDURE DE DIAGNOSTIC
- UNIT CHECK LED : toutes les
diodes du relais doivent
s'allumer
- LAST TRIP INDICATION :
si présente dans la mémoire
du relais
Bleibt angeschaltet, - LED:
allumée tant que 140G-ELTT
Tester est connectée au relais
- READY TO TRIP
Red
Rosso
Verde
Rot
Grün
Rouge
Vert
Rojo
Verde
Change battery
Sostituire batterie
Batterie ersetzen
Remplacer batteries
Sustituir baterías
PROCEDIMIENTO DIAGNOSTICO
- LED CONTROL UNIDAD: todos los
led del relé se deben
encender
- INDICACION ULTIMA ACTUACION:
si está presente en la memoria
del relé
la DIODE reste - LED: queda encendido
mientras la 140G-ELTT Tester
permanezca conectada con el relé
- LISTO PARA LA ACTUACION
4
CLACK
DIR 1000721R0510 Version 00 - L8877
Copyright © 2016 Rockwell Automation, Inc. All Rights Reserved.