Download Print this page
Allen-Bradley 140G Quick Start Manual

Allen-Bradley 140G Quick Start Manual

Padlock adapter for 140g-m
Hide thumbs Also See for 140G:

Advertisement

Quick Links

DIR 1000479R0631 Version 01 - 140G-M-TPA
Padlock adapter for 140G-M
Frontale per blocchi
Frontplatte für Verriegelungen
Frontal pour verrouillages
Frontal para bloques
Installation - Installazione - Instalación
Instalação -
WARNING:
To prevent electrical shock, disconnect from power source before
installing or servicing. Install in suitable enclosure. Keep free from contaminants.
(Follow NFPA70E requirements).
AVVERTENZA: Per prevenire infortuni, togliere tensione prima dell'installazione o
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.
(Seguire i requisiti NFPA70E).
WARNUNG:
Vor Installations- oder Servicearbeiten Stromversorgung zur
Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden. (Befolgen
Sie die Anforderungen nach NFPA70E).
AVERTISSEMENT:
Avant le montage et la mise en service, couper l'alimentation
secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire appropriée.
Protéger le produit contre les environnements agressifs. (Vous devez respecter la
norme NFPA70E).
ADVERTENCIA: Desconéctese de la corriente eléctrica, antes de la instalación o
del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada.
Manténgalo libre de contaminantes. (Cumpla con los requisitos NFPA70E).
ATENÇÃO: Para evitar choques, desconectar da corrente elétrica antes de fazer a
instalação ou a manutenção. Instalar em caixa apropriada. Manter livre de
contaminantes. (Cumpra as exigências da norma NFPA70E).
警告:感電事故防止のため、取付けまたは修理の際は電源から取り外してく
ださい。適切なケース内に取付けてください。また、汚染物質がないことを
確認してください。(NFPA70Eの要件に従ってください)
警告:为了防止触电,在安装或维修之前必须先切断电源。安装在合适的设备
箱内。防止接触污染 。符合NFPA70E要求)
1
CLACK
DIR 1000479R0631 Version 01
-
Label
Handle
Front cover
Door
interlock
Screw
LENGTH
dia.
1 4 mm (0.55")
3.5
Screw
LENGTH
35 mm (1 .38")
2
Bul. 140G/140MG
Base
Label
Trasparent
protection
Escutcheon
M
M 4

Advertisement

loading

Summary of Contents for Allen-Bradley 140G

  • Page 1 Bul. 140G/140MG DIR 1000479R0631 Version 01 - 140G-M-TPA Padlock adapter for 140G-M Frontale per blocchi Frontplatte für Verriegelungen Frontal pour verrouillages Frontal para bloques Installation - Installazione - Instalación Instalação - Label Base WARNING: To prevent electrical shock, disconnect from power source before installing or servicing.
  • Page 2 DIR 1000479R0631 Version 01...
  • Page 3 17.1 lb-in 9.7 lb-in LENGTH 2 Nm 35 mm (1 .38") 1.1 Nm Apply label DIR 1000479R0631 Version 01...
  • Page 4 9.7 lb-in 1.1 Nm use lock from dia. 0.16" to dia. 0.27" use lock from ø 4 mm to ø 7 mm DIR 1000479R0631 Version 01...
  • Page 5 - Compartment door interlock - Blocco della porta della cella - Verriegelung der Schaltfeldtür - Verrouillage de la porte du compartiment - Bloqueo (enclavamiento) de la puerta de la celda LENGTH dia. 1 4 m m (0.55" ) 1.69" 0.55" 43 mm 14 mm R min = 7.88"/200 mm 5.85"...
  • Page 6 Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Automation maintains current product environmental compliance information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/ sustainability-ethics/product-environmental-compliance.page Publication 140G-IN033B-MU-P - April 2016 DIR 1000479R0631 Version 01 (L2518) - B0822 Copyright ©...

This manual is also suitable for:

140mg