Advertisement
SANWAY AUDIO
Control elements
Signal indicator
:
SIGNAL LED
Indicate output signal levels in normal operating range
:
VPL LED
This indicator signals if the amplifier output is clipping or limiting.
CPL LED: Low impedance/Short Circuit Detection Fault
:
MUTE LED
MUTE-Audio protection under mute position.
LED display
Turn on the power supply
Enter
Confirm the parameter you are setting or enter into operation menu
Back
To page up or move the cursor when edit
Next
To page down or move the cursor when edit
Menu
,
In standby state
press this key to enter the system setup program
Input channel setting key
Click this key to make current channel MUTE or Sound On
Push this key 3 seconds to enter into this channel
USB interface
Use a USB cable to connect the machine and PC
Output channel setting key
Click this key to make current channel MUTE or Sound On
Push this key 3 seconds to enter into this channel
ESC
Back to previous menu when click ESC in edit state or return to stand
Control Knob
Set parameters in edit state
Bypass
Choose to open or close when editing EQ Adjusted parameter is not implemented under bypass condition
Power switch
Turn the unit power on or off.
,
display light can display various parameters for use
http://www.china-sanway.com
Control Knob
.
'
s setting mode
.
'
s setting mode
-
by under other conditons
3
Menu
'
s convenience
Advertisement
