Sanway Audio D6Q Manual

SANWAY AUDIO

Contents

DSP
MODEL:
Input:
Output:
PC Com Port:
Processor:
Dynamic range:
Frequency Response:
Distortion:
Signal to noise ratio:
crossover filter:
EQ:
Delay:
Display:
Store Settings:
AMPLIFIER
Model
Output Power
8Ω Stereo Pow er
4Ω Stereo Pow er
2Ω Stereo Pow er
8Ω Bridged Monon Pow er
4Ω Bridged Monon Pow er
Frequenty Response
THD+N(Rated pow er,4Ω/KHz)%
Signal Noise Ration(dB)
Input Impedance
Output Connectors
Pow er Requirement
Dimension
Airframe
Weight
Weight(net)
Contents...........................................1
Important note......................................2
Control elements....................................3
Rear panel features introduction.......................4
Rear panel features introduction.......................5
Audio input and output connections....................6
PC Interface.......................................7
Professional Power Amplifier Specifications.............8
SPECIFICATION
D6Q D10Q
4 channel
4 channel
1 USB Com Port on front panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45)
48KHz Sampling frequency, 48-bit Fixed-Point DSP, 24-bit A/D and D/A converter
>110dB
±0.25dB, 20Hz --- 20KHz
< 0.01%, 20Hz - 20KHz @ +10dBu balanced input
>110dB
Each output channel can be independently set as LPF and HPF, The parameters can be adjusted,
Filter type:Butterworth, Bessel, Linkwitz-Riley; The Crossover Frequency:20Hz---20KHz,
Slope:12,18,24 or 48 dB/octave
Bandwidth:0.2 to 36 oct, Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB
0ms to 115ms
2 x 20 LCD
20 user program dynamic storage
http://www.china-sanway.com
D6Q D10Q
4×625W 4×1300W
4×1250W 4×2200W
4×1500W 4×2500W
2×2500W 2×4400W
2×3000W 2×5000W
20Hz-20kHz ±0.5dB
0.10%
110dB
20KΩ Balanced / 10kΩ Unbalanced
Speakon Connectors(NEUTRIK)
100-120V-50-60Hz or 200-240V-50-60Hz
483×377×88mm
13Kg
1