ASROCK X570 AQUA User Manual page 49

RGB LED Header
(4-pin RGB_LED1)
(see p.8, No. 26)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.8, No. 25)
DisplayPort 1.4 Input
(DPIN2)
(see p.8, No. 28)
This RGB header is used to
1
12V G R B connect RGB LED extension
cable which allows
users to choose from various LED
lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 73 for
further instructions on this
header.
This header is used to connect
1
Addressable LED extension cable
GND
DO_ADDR
which allows users to choose
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 74 for
further instructions on this
header.
This motherboard
provides a DisplayPort 1.4
Input connector. This
connector is used to
connect a graphics card or
a DisplayPort compatible
device.
X570 AQUA
41