BEP 720-MDO Operation And Installation Instructions Manual

BEP 720-MDO Operation And Installation Instructions Manual

Motorised battery switch

Advertisement

Motorised Battery Switch
Model: 720-MDO (Version 8)
OPERATION AND INSTALLATION INSTRUCTIONS

INTRODUCTION:

The 720-MDO is a high current, remotely activated battery switch. This allows convenient operation with
the remote switch within easy reach of the user, and the battery switch positioned where cable runs are
minimized. Reduced cable runs allow smaller section cable to be used, resulting in signifi cant reductions
in cable cost, plus weight savings.
As well as remote, motorized operation, the 720-MDO can be manually over-ridden. From the "Manual
Off" position, the switch knob can also be removed, providing security, particularly during servicing.
Designed and constructed for longevity in the marine environment with tinned copper conductors, stainless
steel nuts and high temperature, fi bre reinforced plastics. The units are ignition protected, provide On/Off
switching operation, and may be recessed or surface mounted.
The Version 8 printed circuit boards include the latest developments in digital circuitry, and optical position
sensing. These result in signifi cant improvements to voltage measurement circuits, switch operation, and
provide low power consumption.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 720-MDO and is the answer not in the manual?

Questions and answers

Summary of Contents for BEP 720-MDO

  • Page 1 OPERATION AND INSTALLATION INSTRUCTIONS INTRODUCTION: The 720-MDO is a high current, remotely activated battery switch. This allows convenient operation with the remote switch within easy reach of the user, and the battery switch positioned where cable runs are minimized. Reduced cable runs allow smaller section cable to be used, resulting in signifi cant reductions in cable cost, plus weight savings.
  • Page 2: Specifications

    Model: 720-MDO (Version 8) OPERATION AND INSTALLATION INSTRUCTIONS The 720-MDO Version 8 offers a number of advanced installation options, whereby the motor/circuit board can be fed from an independent 12V or 24V supply, so the switch contacts are fully isolated and can: •...
  • Page 3 Motorised Battery Switch Model: 720-MDO (Version 8) OPERATION AND INSTALLATION INSTRUCTIONS     DIMENSIONS: LABEL OPTIONS:  - Label set 713   ...
  • Page 4: General Operation

    AUTO OPERATION: When the remote switch is turned on, the 720-MDO moves from a state of “Auto Off” to “Auto On”, and the “Auto On” LED becomes illuminated. Auto operation of the Battery Switch is not possible whilst in manual mode. Knob must be returned to “Auto Off”...
  • Page 5 STANDARD INSTALLATION DRAWING: (Provided only as a guide for installation, not as a complete system design)
  • Page 6 OPTIONAL INSTALLATION: Switch contacts isolated from circuit board/motor supply OPTIONAL INSTALLATION: As a Parallel Switch...
  • Page 7 Motorised Battery Switch Model: 720-MDO (Version 8) OPERATION AND INSTALLATION INSTRUCTIONS CUT OUT MEASUREMENTS (NOT TO SCALE)
  • Page 8 Albany, Auckland N.Z. Ph: +64 9 415 7261 Fax: +64 9 415 9327 www.bepmarine.com E-mail: enquiries@bepmarine.com...

Table of Contents

Save PDF