Table of Contents
Advertisement
1.4
This symbol is used to call your attention to
hazards or unsafe practices which could result in
an injury or property damage. The signal word,
de ned below, indicates the severity of the
hazard. The message after the signal word
provides information for preventing or avoiding
the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
CAUTION
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information in
this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
Electric shock hazard:
This tool is not insulated. When using
this unit on or near energized electri-
cal lines, use proper personal protec-
tive equipment.
Failure to observe this warning could
result in severe injury or death.
HE.17454 / TA04928 D Page 3 of 12
IMPORTANT SAFETY INFORMATION
SAFETY
ALERT
SYMBOL
DANGER
WARNING
WARNING
WARNING
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
ying debris.
Do not use solvents or ammable
liquids to clean the tool body.
Solvents or ammable liquids could
ignite and cause serious injury or
property damage.
WARNING
An incomplete crimp can cause a re.
Use proper die, connector, and cable combinations.
Improper combinations can result in an incomplete crimp.
Failure to observe this warning could result in severe
injury or death.
Pinch points:
• Remove battery before changing
dies, adapters, or jaws.
• Keep hands away from the
crimping tool head when crimping.
Failure to observe these warnings
could result in severe injury or death.
WARNING
Do not dispose of batteries in a re.
Failure to observe this warning could result in
severe injury from harmful fumes or burns from
ying debris.
WARNING
WARNING
WARNING
Advertisement
Table of Contents
