Table of Contents
Advertisement
The wing is equipped with standard spreader bars.
‹
To the central power loop, the main carbines are attached, which, in turn, are attached
‹
to the tandem Risers.
‹
Connect the attachment loops in the centre of the spreader to the riser of the glider.
Connect your passenger to the appropriate loop in order to balance the relative difference
in height and weight between you and your passenger. Always use carabiners of enough
breaking strength for main attachment and for rescue system.
The manufacturer recommends the use of suspension systems with a height of the main
‹
carabiners of at least 42 cm and a distance between them of 42-45 cm.
The wing is delivered with the optimum length of the brakes.
‹
If you need to adjust the length of the brake in accordance with the settings of your sus-
‹
pension system or with your own equipment, we strongly recommend that you do this by
changing the length of the brake no more than 2 cm at a time.
‹
In free flight, with the brakes left, the rear edge of the wing must not be deflected in all
positions of the trim tabs.
4
P R EF L I G HT P RE PA RATI O N
Tandem spreader bars
Harnesses
Adjusting the length of the brake
Advertisement
Table of Contents
