Table of Contents
Advertisement
‹
Risers are designed to connect the lines system of the paraglider with the pilot's sus-
pension system.
‹
Tandem AERO MASTER is equipped with risers with trim tabs and several eyelets for
fastening leash levers.
‹
These leashes can be installed in two different positions (but only symmetrically!)
Depending on the preference or composition of the pilot.
Lines are attached to the risers using soft links - strong connecting elements from the
‹
dyneema, which are fixed in the ring by a knot-hammer.
It is necessary to regularly check the correctness of installing and securing soft links
‹
under protective covers on risers.
Trimmers are designed to increase the speed range of the paraglider by reducing and /
‹
or increasing the angle of the wing.
The maximum increase in speed is achieved with fully released trimmers.
‹
Clamped trim tabs reduce the balancing speed with the released control lines.
‹
When taking off from a very steep slope or with a heavy passenger, it is recommended
‹
to tighten the trim tabs a little.
It is recommended to work with trim tabs strictly symmetrically.
‹
3
P R E FL I GH T P RE PA R AT IO N
Risers
Trimming system
Advertisement
Table of Contents
