3 Connect
Make the following basic connections to use the
DVD player.
Basic connections:
•
Video cables
•
Audio cables
Optional connections:
•
Audio to other devices:
•
Multi-channel receiver
•
Digital amplifi er/receiver
•
Analog stereo system
Note
•
Refer to the type plate at the rear or bottom of the
product for identifi cation and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
available at www.connectivityguide.philips.com.
Connect video cables
Connect this DVD player to the TV to view
disc play.
dvp3368_94_en.indd 9
dvp3368_94_en.indd 9
Select the best video connection that the TV can
support.
•
Option 1:
Connect to HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
•
Option 2:
Connect to component video
jacks (for a standard TV or Progressive Scan
TV).
Option 3:
•
Connect to video (CVBS) jack
(for a standard TV).
Note
DVD player
•
You must connect this
TV.
Option 1: Connect to HDMI jack
HDMI IN
HDMI OUT
1
Connect a HDMI cable (not supplied) to
the HDMI OUT jack on this DVD player
and the HDMI input jack on the TV.
•
Use a HDMI-DVI adaptor in case the
TV has only a DVI connection.
Note
•
If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see
chapter 'Use Philips EasyLink').
Tip
•
This type of connections provide best picture quality.
directly to a
9
2/19/2009 12:16:20 PM
2/19/2009 12:16:20 PM