Philips DVP3368/94 User Manual page 33

[ Audio ]
Select the default audio language for
DVDs.
[ Subtitle ]
Select the default subtitle language for
DVDs.
[ Disc Menu ]
Select the menu language for DVDs.
Note
•
If the language you have set is not available on the
disc, the disc uses its own default language.
•
For some DVDs, the subtitle/audio language can only
change from the disc menu.
•
To select the languages that are not listed in the
menu, select [ Others ]. Then check the Language
Code list at the back of this user manual and enter
the respective language code.
[ Parental Control ]
Restrict access to DVDs that are unsuitable
for children. These types of DVDs must be
recorded with ratings.
1. OK.
Press
2. Select a rating level, then press
3. numeric buttons to enter
Press the
the password.
Note
•
Rated DVDs above the level you set in
Control ] require a password to be played.
•
The ratings are country-dependent. To allow all discs
to play, select '8'.
•
Some DVDs have ratings printed on them but are
not recorded with ratings. This function has no
effect on such DVDs.
Tip
•
You can set or change the password, go to
[ Preferences ] > [ Password ].
dvp3368_94_en.indd 33 dvp3368_94_en.indd 33
OK.
[ Parental
•
If you forget the password, enter '136900' before
you set a new password.
[ PBC ]
For VCDs/SVCDs recorded with PBC
(playback control), you can access the disc
content through an interactive menu.
[ On ]
• – an index menu is displayed
when you load a disc for play.
[ Off ]
• – skip the menu and start play
from the fi rst track.
[ Mp3/Jpeg Nav ]
Select to display the folders or display all
the fi les.
• [ View Files ] – display all the fi les.
• [ View Folders ] – display the folders of
MP3/WMA fi les.
[ Password ]
Follow the instructions on the TV to set or
change the password for locked discs and
play restricted DVDs.
Preferences
Change password
Old Password
New Password
Confirm PWD
1. numeric buttons to enter
Press the
'136900' or the last set password at [
Old Password ] fi eld.
2. Enter the new password at
Password ] fi eld.
3. Enter the new password again at
[ Confi rm PWD ] fi eld.
4. Press OK to exit the menu.
Note
OK
[ New
33
2/19/2009 12:16:21 PM 2/19/2009 12:16:21 PM