ENGLISH 1. Contents Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and page lead to loss of control over the power tool. 2.Specific safety instructions........22 Wipe up spilled gasoline at once. 3.Instructions for use............23 3.1 Placement Tool.............23 Connections for standby power to a building's...
Start the engine and make sure the output indicator light 10 serious injury or death. (green) illuminates or dial 230 voltmeter ( GID1000, GAV2800, GAV5500E, GAV7500E To prevent the possibility of creating a spark near the Confirm that the appliance to be used is switched off, and battery, connect charging cable first to the generator, then plug in the appliance.
AC output. Be sure to check the generator on a level surface with the engine stopped. A GID1000 DC overload, and GID 2200 GID1400 disconnect the DC circuit protector 20. If this happens, 4.2 Start 4T (except GID 1000) unplug the DC load before resetting the circuit protector to resume operation.
ENGLISH 4.7 Electrical installation Inspection: - Remove the spark plug rubber boot and clean any dirt from around the spark plug. The electrical system will be mandatory for attesting - Remove the spark plug and place it in the spark plug authorized in writing their work.
5.2 Lubricating oil 5.4 Fuel The model is GID1000 2T and needs no oil in its GID1400 / GID2200 / GAV2800 / GAV5500E / GAV7500E crankcase, the oil lubrication 4% mixed with Turn the fuel cap 17 lever to "OFF" position before unleaded gasoline transporting.
ENGLISH To prevent carburettor malfunction, service the air cleaner Avoid a place exposed to direct sunlight when putting the regularly. generator on a vehicle. If the generator is left in an enclosed vehicle for many hours, high temperature inside the vehicle Service more frequently when operating the generator in could cause fuel to vapor ze resulting in a possible extremely dirty areas.