Wi-Fi Setting; Connect To A Wi-Fi Network; Disconnect From A Wi-Fi Network - LAUNCH TECH X-431 PRO3 User Manual

LAUNCH
Note: Once WLAN is set as ON, X-431 PRO3 will consume more power. While
WLAN keeps unused, please turn it off to conserve battery power.
X-431 PRO3 has built-in Wi-Fi that can be used to get online. Once you're online,
you can register your X-431 PRO3, browse the Internet, get apps and send
email on your network.

3.1 Connect to a Wi-Fi network

1. On home screen, tap Settings > WLAN.
2. Tap or slide the Wi-Fi switch to ON, X-431 PRO3 starts searching all
available wireless LANs.
3. Choose the desired Wi-Fi access point / network,
If the network you chose is open, you can connect directly;
If the selected network is encrypted, you have to enter the right security
key (network password).
Note: On the WLAN setting page, tap
network.
Once it is connected successfully, tap the Wi-Fi network from the list to view its
name, link speed, security type, IP address etc.
When this tool is in range, it will connect to the previously linked network
automatically.

3.2 Disconnect from a Wi-Fi network

1. On home screen, tap Settings > WLAN.
2. Tap the network with a Connected status, then tap "Disconnect".
X-431 PRO3 User's Manual — General Operations

3 Wi-Fi Setting

and choose "Add network" to add a new
10