Installation; Use; Maintenance/Cleaning; Important Information Concerning The Environmentally Compatible Disposal - Vortice CALDOMI Instruction Booklet

ENGLISH

Installation

Floor-standing installation:
The appliance has a removable pull-out foot, which
allows installation on a flat surface. When required,
insert the foot until it is securely in place (fig. 7)
N.B. if the foot is not properly inserted, the appliance
cannot remain in an upright position.
Wall installation:
The appliance is supplied with a wall-mounting
bracket. When required:
• remove the foot, using the fixing hook as a lever,
and insert the spacer cap (fig.5);
• Fix the hook to the wall, observing the safety
distances (fig.8);
• Hang the appliance on it and secure it using the
safety screw (fig.9)
• When mounting on the wall, pay attention to any
power lines or water and gas pipes inside the wall.
For this reason, make fixing holes after carefully
checking there are none of the above-mentioned
elements.
• It is not permitted to mount the appliance on the
ceiling.

Use

• The appliance has a rotary switch which can be
used for the following functions:
cold air (ventilation);
hot air at minimum power (1000 W);
hot air at maximum power (2000 W);
frost protection: the anti-freezing function when set,
enables automatically switching on the appliance at
the previously selected power if the room
temperature drops under +5°C;
power off..
• A thermostat enables setting the desired
temperature in the room containing the appliance,
turning it on and off as a result. For this purpose,
turn the corresponding knob as far as it goes (MAX
position). Afterwards, turn the knob in the opposite
direction to switch off the appliance that, from that
moment on, will switch on and off automatically to
keep the selected temperature.

Maintenance/cleaning

• Switch off the appliance and let it cool down.
• Disconnect the plug from the power socket.
• Clean the appliance's casing with a soft cloth,
taking care not to let any water get inside it.
• Regularly clean the air intake and outlet grilles.
• Do not immerse the appliance in water.
• Do not use any chemical, abrasive or corrosive
substances or spirits as they could damage the
appliance or some of its parts.
• If the appliance is not to be used for a long time, it
must be protected from dust and dirt.
8
Important information
concerning the
environmentally compatible
disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING DIRECTIVE WEEE, AND IN
THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol
of the barred waste bin. This
indicates that, at the end of its
useful life, it must not be disposed
of as domestic waste, but must
be taken to a collection centre for
waste electrical and electronic
equipment, or returned to a
retailer on purchase of a replacement.
It is the user's responsibility to dispose of this
appliance through the appropriate channels at the
end of its useful life. Failure to do so may incur the
penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent
recycling, processing
compatible disposal of waste equipment avoids
unnecessary damage to the environment and
possible related healthrisks, and also promotes
recycling of the materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service,
or the shop from which you purchased the appliance.
Manufacturers and
responsibilities for recycling, processing and
environmentally compatible disposal either directly or
by participating in collective systems.
NOT FALL WITHIN
and environmentally
importers fulfil
THE
their