Advertisement
Available languages
Available languages
Using Your Craftsman? EASY
FIRE™ Stapler/Nail Gun
Selecting the Right Staple:
To maximize performance, your Craftsman®
EASY FIRE™ Stapler/Nail Gun has been
designed to work with genuine Craftsman®
narrow crown heavy-duty staples in various
lengths from 1/4 inch to 9/16 inch and 9/16
inch brad nails (see page 5 for Craftsman
staple and nail part numbers). The
Craftsman® EASY FIRE" Stapler/Nail Gun is
also compatible with other brands of heavy
duty staples such as Powershot® and Arrow®
T-50™ brand heavy duty staples.
Selecting the Right Staple Length:
As a general guideline, when stapling into
wood, allow for leg penetration of
approximately 3/16".
For additional tips on selecting the right staple
length for specific applications, refer to the
Staple Selection Chart on page 5 of this
Instruction Manual.
*Arrow® T-50° are registered trademarks
of Arrow Fastener Company.
Loading Staples and Nails
(Fig. 1, 2 and 3)
> The Craftsman? EASY FIRE™
Stapler/Nail Gun is equipped with a
Quick-Load Staple Chamber (Fig. 1).
P
Make sure there are no staples
jammed from previous usage by
checking the handle operation.
CAUTION: If a staple
J
is jammed, point the gun
away from yourself and
others before opening
the track as the jammed
staple may be fired out
upon opening.
BP
|fthere are no jams, turn gun upside
down and tilt the gun away from
yourself and squeeze track release
and pull open staple chamber (Fig.
1). For maximum leverage squeeze
track release as close to housing as
possible (Fig. 5).
Place staples into chamber with point
facing upwards (Fig. 2).
P
Toload nails, lean nails against side
of chamber with "T" icon on housing,
which is also the side of the stapler
with the staples remaining window
(Fig. 3).
Firing Your Craftsman® EASY
FIRE™ Stapler/Nail Gun (Fig. 4)
Craftsman® EASY FIRE™ Stapler/Nail Gun
has been designed for unprecedented ease
of use and control. Simply grasp the staple
and nail gun with your hand on the easy part
of the gun (Fig. 4) and apply smooth, even
pressure. Make sure the nosepiece is placed
firmly against the workpiece before firing.
Staple exits beneath your hand.
Staples Remaining and
Staple Size Window
Use the Staples Remaining Window,
located on the left side of the gun, to
determine when it's time to reload. Also use
the window to see what size staples are
loaded.
Staple Exit Indicator (Fig. 5)
Use the Staple Exit Indicator when you
need greater precision in placing your
staples. Staples will exit the gun directly
behind the nose.
Using the Wire Guide (Fig. 6)
P
Use the wire guide to help prevent
stapling into low voltage wire. The
guide provides a groove, to place
wire into before stapling, to help
prevent puncturing the low
voltage wire (Fig 6 a).
P
Touse the wire guide: slide lever
toward front of stapler so the
groove is protruding under staple
exit point (Fig. 6).
A
IMPORTANT:
POINT THE GUN AWAY FROM
YOURSELF AND OTHERS at ai
times and especially when
Opening the track to clear a
jammed staple. As the track is
opened, the jammed staple may
be shot out unexpectedly.
Clearing the Nail and
Staple Chamber
If, while using your Craftsman® EASY
FIRE™ Stapler/Nail Gun, it becomes
necessary to clear a jam from the staple
chamber or track, follow these
instructions:
P
With the bottom of the gun
facing away from your face and body,
open the staple chamber by pulling the
release straight down and away from
the stapler housing then sliding it
back. (Note: the jammed staple
may cause the track to be harder
to slide out than usual. Once the
staple has been cleared, the track
will resume its normal, free
operation.) Loose staples will be
expelled from the chamber.
P
Clear any remaining staples from
the track and chamber area.
P
Reload the Craftsman® EASY
FIRE" Stapler/Nail Gun and
continue using.
Storing Your Craftsman?
EASY FIRE" Stapler/Nail Gun
>
When finished using your
Craftsman® EASY FIRE™ Stapler/Nail
Gun, unload any remaining staples
or nails.
P
Store ina dry place, out of the
reach of children.
Sears Warranty
Full One Year Warranty on Craftsman®
EASY FIRE™ Stapler/Nail Gun. If this
Craftsman® EASY FIRE" Stapler/Nail
Gun fails to give complete satisfaction
within one year from date of purchase.
RETURN IT TO THE NEAREST
SEARS STORE IN THE UNITED
STATES (if purchased in the US) and
CANADA (if purchased in Canada), and
Sears will replace it, free of charge. If
this Craftsman® EASY FIRE™ Stapler/
Nail Gun is used for commercial or
rental purposes, this warranty applies
for only 90 days from the date of
purchase.
Advertisement
