Table of Contents
Advertisement
REMOVmNG A JAMMED
NAta!!STAPLE
Remove battery pack from the tool.
m Hold tool upside down; squeeze latch and slide base
open.
m Remove unused nails/staples from magazine.
m Remove jammed nail/staple with needle nose pliers.
NOTE: You must remove jammed nail/staple before
using tool any further. Hfyou try to fire a nail/staple
while the tool is jammed, you could cause damage to
the mechanism.
_
WARNING:
When servicing, use only identical
Craftsman replacement parts. Use of any other part
may create a hazard or cause product damage.
_
WARNING:
Always wear safety goggles or safety
glasses with side shields when using compressed
air
to clean tools. Hf t he operation is dusty, also wear a
dust mask.
_
WAF{NING:
To avoid serious personal injury, always
remove the battery pack from the tool when cleaning
or performing any maintenance.
GENERAL
MAmNTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
_
WARMNG:
Do not at any time let brake fluids,
gasoline, petroleum-based
products, penetrating
oils, etc. come in contact with plastic parts. Chemi-
cals can damage, weaken or destroy plastic which
may result in serious personal injury.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
The battery pack for this tool is equipped with nickel=cad-
mium rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in this too! have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
[] Remove the battery pack from the charger once it is
fully charged and ready for use.
For battery pack storage longer than 30 days:
[] Store the battery pack where the temperature
is below
80°F.
[] Store battery packs in a "discharged"
condition.
BATTERY
PACK REMOVAL
AND
PREPARATION
FOR RECYCUNG
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains nickel-cadmium
batteries. Local, state or federal
laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash.
Consult your !ocal waste authority for information
regarding available recycling and/or disposal options.
WARMNG:
Upon removal, cover the battery pack's
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components.
Nicke!-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
13
Hide quick links:
Advertisement
Table of Contents
