Use Philips Easylink - Philips BDP7300/05 User Manual

7.
Select [Finish] in the menu, then press OK
to exit.
Note
•
This player does not support automatic detection of
cross-cables.
•
Loading BD-Live content from the internet may take
some time, depending on the fi le size and the speed
of the internet connection.

Use Philips EasyLink

Your Blu-ray disc player supports Philips
EasyLink, which uses the HDMI CEC
(Consumer Electronics Control) protocol.
EasyLink-compliant devices that are connected
through HDMI connectors can be controlled by
a single remote control.
Note
•
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
1
Turn on the HDMI CEC operations on the
TV and other connected devices. See TV/
devices manual for details.
2
You can now enjoy the following Philips
EasyLink controls.
EasyLink
Turn off or on all EasyLink features.
One-touch play
When you press PLAY button on the
remote control, the TV (if support
one-touch play) and the Blu-ray disc
player will be turned on. Disc play starts
if there is a disc in the Blu-ray disc player
and the TV automatically switches to the
correct channel to show the video
content.
One-touch standby
When you press and hold STANDBY
button on the remote control, this
player and all the connected HDMI CEC
devices (if support one-touch standby)
switch to standby mode simultaneously.
EN 19